EX300 420 Motor capacitor explosion-proof 30µF 420V SÜKO

explosion protection:

iI 2G Ex q IIC T6 Gb

test certificate:

sEV 10 ATEX 0154X

rated voltage:

420VAC

rated frequency:

50-60Hz

capacity tolerance:

±5%

temperature range:

-20°C to +50°C

lifetime class:

30,000h / class A

protection class:

iP 54

conformity to standards:

eN 60079-0
EN 60079-5
EN 1127-1

certification body:

electrosuisse CE 1258

conformity to:

rL 94/9 EG

connections:

cable approx. 450mm long

base screw:

m12

safety instructions :

only use the capacitors for the approved purpose. incorrect or impermissible use and
non-compliance with the instructions in the operating manual will invalidate the manufacturer's warranty.
conversions and modifications to the capacitors that affect the explosion protection are not permitted.
the capacitor may only be operated and installed in an undamaged and clean condition. Damage
may invalidate the explosion protection.

special conditions:

the Ex motor capacitors may only be used for fixed installations. An additional
clamp connection of the cable (line) must be mounted by the operator to ensure that pull and twist are not transmitted to the terminals
.

application:

the capacitors are approved according to EC Directive 94/9 EC (ATEX 100a) and comply with the European
standards for explosion protection. Use is approved in all Zone 1 and 2 hazardous areas.

maintenance :

the condition of the adhesive covers provided over the vents must be checked at suitable intervals
. Condensers with damaged adhesive covers must be replaced.

commissioning :

before putting the condenser into operation, make sure that:
The condenser has been installed according to the instructions
The connection has been carried out properly
The condenser is not damaged
Before starting this work, the condenser must be disconnected from the power supply

observe the applicable national regulations in the country of use!